Juice Goose SQ-1500 3 Sequenced 15A Power Distribution System with Remote Control Capability

About Juice Goose SQ-1500 The SQ-1500 is an economical power sequencer for single rack applications when local or remote control is required. Remote activation with a latching contact closure makes installation and operation simple and efficient. The SQ-1500 has a 15 amp capacity with 7 AC power outputs on the rear of the chassis. One output is unswitched. The remaining 6 outputs are grouped into 3 Power Pods of two outputs each. Each Power Pod is an individual sequence event. All outputs have Juice Goose quality surge and spike protection as well as line noise filtration. This product features LEDs on the front of the chassis for real time monitoring of the processor and sequencing functions. A green flashing LED indicates the continuing operation of the processor that controls and drives the sequencer. Individual red LEDs are tied to the output of each of the relays. Each LED lights when its relay latches. The LED can only be on when the relay is latched. Remote Controls and Monitors The SQ-1500 can be triggered by the switch on the front of the unit or by a remote contact closure. There are five positions on the remote control terminal on the back of the SQ-1500. This communication link allows the SQ-1500 to be controlled by closing and opening a latching contact. • Terminal Connections for Remote Control • 1 to 4 – Sequence Down • 1 to 5 – Sequence Up (Other positions are currently open) When there is no contact on the terminal the sequence switch on the front determines the function of the unit. The SQ-1500 can be activated with a custom mounted single or double pole switch, a relay or any other latching device including controllers from Crestron, AMX and other manufacturers. Local Controls and Monitors The SQ-1500 features a two position sequence switch on the front of the chassis. This switch is active only if there is no contact closure on the connect terminal on the back of the unit. When active, this switch causes the unit to sequence up or sequence down. A Manual Override switch allows the SQ-1500 to be manually operated, overriding the control circuit in the unlikely event of a fault or failure. The Manual Override switch actives all outlets at once without sequencing. Indicator LEDs on the front of the chassis allow local monitoring of the unit operation. The PROCESSOR light will blink to indicate the control processor on the unit is functioning. The POD lights are illuminated as a result of contact closure by the CQ relays, indicating that relay closure has occurred.