Shape Camera Cage Kit with Matte Box and Follow Focus for RED KOMODO

About Shape Camera Cage Kit Full camera cage with 15 mm LW rod system for RED KOMODO (KOROD) The three-piece cage kit, the 15 mm LW baseplate system and the L-shaped top handle offer protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. Camera cage with top handle for RED KOMODO (KOTHC) The three-piece cage kit and L-shaped top handle offer protection and accessory-mounting threads for your RED KOMODO camera. The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminum and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key. Camera cage for RED KOMODO (KOCAGE) The three-piece cage kit offers protection and accessory-mounting threads for your RED KOMODO camera. This lightweight, three-piece cage maintains access to your camera’s controls and ports and come with thread holes side plates with M6 ARRI rosette on both sides. Made of CNC anodize aluminum., the top plate (KOMOTP) can be mounted strongly at the top of your RED KOMODO camera using two 1/4″-20 UNC socket head cap screws. The plate features 3/8″-16 and 1/4-20 UNC threaded mounting holes, including the ARRI anti-rotating system to better secure your accessories. Two removable 15 mm LW rod bloc clamp (15CTH) can be mounted at the front of the top plate, allowing easy positioning of your accessories. Each sides of the rod bloc clamp are also designed with a ratchet system to strongly secure your rods to the rig. Side plates threaded holes: • 2x 3/8-16 with anti-rotating • 2x 1/4-20 with anti-rotating • 1x Arri Rosette mount on each side plate Top plate threaded holes: • 1x 3/8-16 with anti-rotating • 4x 1/4-20 with anti rotating • 9x 1/4-20 RED KOMODO 15 mm lightweight Baseplate (B15KOMO) The 15 mm LW Baseplate system is designed to match the RED KOMODO optical center with or without the expander module. It features an adapter plate, a dovetail spacer with Arri rosette mounts and a 15 mm LW baseplate. Strongly mount the dovetail plate at the bottom of your camera body with 1/4-20 and 3/8-16 screws. The dovetail plate slides into the dovetail spacer which is mount to the 15 mm LW baseplate. Simply slide out from your dovetail spacer and slide it back into your ronin 2 gimbal system without having to screw or unscrew any plates. The dovetail spacer can receive SHAPE Arri rosette on both sides and features 3/8″-16, ARRI-style anti-twist threads to mount accessories. The 15 mm LW baseplate comes with a pair of 15 mm rods 12″ and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. Follow Focus Kit (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it’s tightened by a locking lever. The clamp’s rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11″ whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. • At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank; • All gears can be flipped to the front or back position which is helpful for compact lens configurations; • Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body; • Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you’re ready; • A compact design takes little space, so you can still attach a matte box to the front; • Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. Matte box 4×5.6 (MAT4X56) The 2-Stage 4 x 5.6″ matte box from SHAPE can be used as a clip-on matte box and can be mounted on industry-standard 15 mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6″ filter holder. The matte box accepts lenses with a front diameter up to 114 mm. It comes with a 82 mm filter ring and six step-up rings that allow you to fit lenses with an outer diameter (52-82, 58-82, 62-82, 67-82, 72-82, 77-82)mm. 15 mm 12″ rods (15TUBE12) This pair of SHAPE 15 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Shape Camera Cage Kit Features Designed to match the RED KOMODO optical center with or without the expander module 15 mm LW baseplate, adapter plate and a dovetail spacer L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Top plate designed with 15 mm LW rod bloc clamp Side plates designed with ARRI rosette mount Cage, handle and baseplate feature several anti rotating threaded holes (3/8-16, 1/4-20) SHAPE kit focus single rod follow focus 15 mm LWs 2-Stage 4 x 5.6″ matte box Made of CNC aluminum