Tilta Basic Full Camera Cage Kit for BMPCC 6K Pro, Black

About Tilta TA-T11-B Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. This Basic Kit for the BMPCC6K Pro provides protective armor for the camera body and includes some relevant accessories to improve functionality. The Full Cage offers several 1/4″-20 threads with locating pins, cold shoe receivers, a NATO Rail for Type IV and VI Side Handles, as well as Rod Attachment Ports for our Single Rod Holders. It also features ARRI compatible rosettes, which are specifically designed for our Adjustable Top Handle Plus for more flexible operating and handling. The right side arm module can be removed to turn this Full Cage into a Half Cage. This offers more flexibility in situations where lighter builds are required such as when using a gimbal. The Bottom Plate provides several 1/4″-20 mounting points for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate. When using the Half Cage, the bottom plate can be extended to support the Black Magic Design Battery Grip for 6K Pro. An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup. The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and 1/4″-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system. The Top Handle features additional 1/4″-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs. The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a Samsung T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port. This creates an extremely secure connection between your camera and drive. The 90 Degree HDMI Adapter mounts to the cage near the camera’s HDMI port and offers a secure connection that limits wear on the port itself. – Full Camera Cage – Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. This Camera Cage for the BMPCC6K Pro provides protective armor for the camera body and allows you to secure different accessories to improve the camera’s functionality. The Full Cage offers several 1/4″-20 threads with locating pins, cold shoe receivers, a NATO Rail for Type IV and VI Side Handles, as well as a Rod Attachment Ports for our Single Rod Holders. It also features ARRI compatible rosettes, which are specifically designed for our Adjustable Top Handle Plus for more flexible operating and handling. The right side arm module can be removed to turn this Full Cage into a Half Cage. This offers more flexibility in situations where lighter builds are required such as when using a gimbal. The Bottom Plate provides several 1/4″-20 mounting points for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate. When using the Half Cage, the bottom plate can be extended to support the Black Magic Design Battery Grip for 6K Pro. Detachable Design Lightweight, Compact, Durable. Compatibility Compatible with the original battery grip from Blackmagic Design. Under the half cage setup, remove the bottom plate and secure it to the bottom of the battery grip. 15mm Rod Holder With the original battery grip mounted, the 15mm rod holder and 15mm rods can be installed to mount a follow focus, lens support, etc. Viewfinder Extension Newly patented viewfinder extension. Provides a fully immersive operating experience. Adjustable For Viewing Angle Find your best viewing angle. Easily adjustable for different user’s operating needs. Provides the best view for operating. Easy Installation Extremely adjustable. The connecting joint supports 360 Degree adjustment. The support arm can be adjusted both horizontally and vertically. Top Plate The top plate has 3 built-in cold shoe mounts and 1/4″-20 screw holes for mounting various accessories. Easy Mounting Supports the new Tilta M.2 SSD case. Easily mounts onto any 1/4″-20 screw holes on the camera cage. Quick Release SSD Drive Holder Compatible with T5 and T7 SSD drives. Side Arm Includes ARRI Compatible Rosette, 1/4″-20 Screw Holes with Locating Points, and NATO Rail. 90 Degree Angled Cable Adapter 90 Degree angled cable adapter for more secured mounting. Provides more efficient operating and data protection. Tactical Combat Design With the NATO rail adapter mounted, it can be installed to any 1/4″-20 screw hole. Reserved Space Reserved space for securing an M.2 SSD case. Compatible with Original Battery Grip From Blackmagic Design. Features • Protective Armor: for BMPCC 6K Pro Minimizes Wear and Tear Over Time • Mount Accessories: via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4″-20 Threads with Locating Pins • Half or Full: Detachable Design Allows More Flexibility in Different Shooting Situations • Arca Compatible: Bottom Plate Allows for Quick Mounting to the DJI RS 2 • Battery Grip: Compatible via an Adjustable Bottom Plate – Quick Release Top Handle – This quick release top handle easily and securely attaches to the top of the half and full Tiltaing camera cages. It provides several 1/4″-20 and 3/8″-16 mounting points as well as one cold shoe mounting point on the front and one on the back of the handle. A 15mm horizontal rod mount is built into the handle to allow for various rigging possibilities such as mounting an EVF or external monitor via a 15mm rod. Note: Can only mount backwards on RED Komodo Top Plate Features • Universal: Compatible with Most Tiltaing Cages • Secure Connection: via Cold Shoe and 1/4″-20 Screw • EVF Support: via a 15mm Rod Mount • Mount Accessories: via 1/4″-20 Threads and Cold Shoe Receivers • Sturdy: Aluminum and Steel Construction – Tiltaing SSD Drive Holder – This SSD Drive Holder attaches directly to Tiltaing Half and Full Camera Cages via a 1/4″-20 screw and locating pin. It clamps onto a Samsung T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. This Drive Holder perfectly compliments our USB-C cables as the holder and most of our cages feature threads for the cable to screw into on each end. This creates an extremely secure connection between your camera and drive. Features • Custom Designed: for Samsung T7 SSD Drives • Compatible: with Tiltaing Cages via a 1/4″-20 Thread and Locating Pin • Cable Mount: Provides Extra Security for your Tiltaing USB-C Cable • Locating Pin: Provides an Additional Point of Contact to Secure the Holder • Lightweight & Durable: Aluminum and Steel Construction – 15mm Rod Holder – This 15mm Rod Holder can be installed to support 15mm rods when using the Battery Grip in the Half Cage setup via the extended bottom plate. This allows you to mount rod based accessories in front of the camera body such as matte boxes, follow focus systems, or Lens Supports. This Rod Holder secures to the Half Cage Extension Bracket via a 1/4″-20 screw and locating pins which provides a secure connection while preventing unwanted rotation. Features • Custom Designed: for our BMPCC 6K Pro Camera Cage • 15mm Rod Support: Secure 15mm Rods to your System for Various Accessories • Locating Pins: Create a Secure Connection and Prevent Unwanted Rotation • Compatible: with the Blackmagic Design Battery Grip via the Half Cage and Extension Bracket • Lightweight & Durable: Aluminum & Stainless Steel Construction – HDMI Right-Angle Adapter – This HDMI adapter was designed specifically for the Tilta BMPCC 4K camera cage. It allows for an easy way to attach an HDMI cable to your camera while ensuring that the cable tightly hugs the side of the cage. – 12″ 90 Degree USB Type-C Cable – This 30cm USB-C cable was specifically designed to integrate with the Tilta BMPCC 4K camera cage. It’s designed with a 90-degree connection on each end so that the cable perfectly hugs the side of the cage. Tilta TA-T11-B Features Protective Armor: for BMPCC 6K Pro Minimizes Wear and Tear Over Time Mount Accessories: via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4″-20 Threads with Locating Pins Quick Release Top Handle: Provides More Flexibility When Operating and Handling Record to SSD: via the Samsung T7 Drive Holder and Mountable USB-C Cable 15mm Rod Support: When Using Battery Grip Extension Bracket