CyberPower Intelligent LCD BRG1000AVRLCD 10 Outlet 1000VA 600W Surge Protection and Battery Backup Mini-Tower UPS System

About CyberPower BRG1000AVRLCD FEATURED REVIEWS See all 1 reviews   A great value for the money By Greg S. A great value for the money. I had a prior version of this but needed to replace it after 6 years. The new 5-year warranty is a plus. Works great and I have had no issues with it. 5 battery backed outlets is enough for my tower, monitor, router and Nas for up to 20 minutes, though if power is out for more than 5 minutes I just shut down gracefully. The main benefit is to catch all the brownouts I get in my area so I never have to worry about losing any work or connectivity. A mini-tower UPS with line interactive topology, the CyberPower Intelligent LCD Series BRG1000AVRLCD provides battery backup (using simulated sine wave output) and surge protection for desktop computers, workstations, networking devices and home entertainment systems. The BRG1000AVRLCD uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. Two USB charge ports (2.1 Amp shared) rapidly power portable devices such as mobile phones, MP3 players and cameras. The BRG1000AVRLCD comes with a five-year warranty (including coverage of batteries) and a $350,000 Connected Equipment Guarantee. Battery Backup Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown. Surge Protection Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage. Data Line Protection Prevents power surges that travel through telephone, coaxial and Ethernet lines from causing damage to electronics. Line Interactive Topology Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery. Automatic Voltage Regulation (AVR) Provides clean, consistent AC power by automatically regulating low voltages and over voltages, within defined tolerances, when incoming utility power has minor fluctuations. Simulated Sine Wave Output Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output. GreenPower UPS Bypass Design Is a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise and heat buildup. USB Charge Ports Rapidly charge and power USB devices such as tablets (including iPad), smartphones, MP3 players and other mobile accessories. Multifunction LCD Panel Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime. Ultra Quiet Design Minimizes noise during operation for a quieter work environment. PowerPanel Personal Software Provides a user-friendly dashboard interface for controlling and monitoring the UPS . Five-Year Warranty CyberPower will repair or replace a defective UPS system (including batteries) within five years of the purchase date. Connected Equipment Guarantee CyberPower will repair or replace properly connected equipment if it is damaged by a power surge. GreenPower UPS Technology: Bypass Design GreenPower UPS Technology from CyberPower improves operating efficiency, reduce heat generation and consume less power than conventional UPS models. Our patented Bypass Design allows current to bypass the transformer and automatic voltage regulation (AVR) when utility power is normal, thus reducing energy consumption and associated costs. Because utility power functions normally most of the time, the bypass design allows for substantial energy savings. This technology also reduces heat generation, an important factor in decreasing operating costs. Automatic Voltage Regulation Automatic Voltage Regulation (AVR) in line interactive UPS systems stabilizes the incoming AC signal to maintain output power at a nominal 120 volts by controlling high and low voltages without resorting to battery power. This significantly increases battery life and lessens the likelihood of data loss, memory freezes and system crashes. How AVR Works in a Line Interactive UPS A line interactive UPS includes an AVR autotransformer a special type of transformer designed to switch between powered coils of wire in response to variances in utility power input, thereby increasing or decreasing the magnetic field and the resulting output voltage to connected equipment. This type of UPS tolerates under voltage brownouts and overvoltage surges without consuming backup battery power by automatically selecting different power taps on the AVR autotransformer. During normal operation, incoming AC power bypasses the autotransformer (where voltage highs and lows are controlled) while also charging the battery. When the incoming voltage falls below the AVR range, the UPS switches to battery backup and the DC-AC inverter circuitry is engaged. Power will continue to be supplied by the battery-inverter circuit until incoming voltage returns to the range manageable by the AVR. Transformers and Transformer Outlets A transformer converts alternating current line voltage to a higher value or a lower value. Transformers rely upon electromagnetic induction, the process which occurs when the alternating current within a circuit generates current in a nearby circuit. Transformers vary in design and size, as well as using different amounts of current. Small transformers plug into a wall outlet and create low direct current voltages which are used by common electronic devices. Transformer outlets are more widely spaced than other outlets to accommodate transformer block adapters or other adapters that are large in size. Transformer outlets can be used to connect any appropriate device to a surge protector. Product Information provided by the Manufacturer Why Do You Need a UPS System? Even brief power outages can result in data loss or potential hardware damage. A UPS system provides battery backup power to keep your devices running during short outages and provides enough runtime to properly shut down electronics during extended outages. Desktop Computers Ensure seamless power to your PC and make certain you have time to safely shut down your system during a longer outage. Personal Electronics Don’t let the game end when the power goes out. Backup battery power keeps gaming consoles, stereos, and chargers running. Home Theaters Protect sensitive televisions, projectors, satellites, and cable boxes from power surges and spikes. How long will the UPS power my systems after the power goes out? Do all of the outlets have battery backup and surge protection? Can the BRG1000AVRLCD be monitored? Can this unit run a sump pump, laser printer, or other larger office equipment? How do I mute the alarms? Documents Proposition 65 Disclaimer This product can expose you to chemicals including Styrene, which are known to the State of California to cause cancer, and Bisphenol A (BPA), which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. CyberPower BRG1000AVRLCD Features 1000VA / 600W Line Interactive Topology Automatic Voltage Regulation GreenPower UPS ENERGY STAR Qualified USB 2.1A Charging Ports Full-time Surge Protection and Battery Backup Mini-Tower Form Factor 10 Outlets/USB Port/RJ11 and RJ45 Protection EMI/RFI Filters PowerPanel Personal Edition 5-Year Warranty