Kramer Electronics WP-577VH Active Wall Plate HDMI & Computer Graphics with Bidirectional RS-232 & Stereo Audio DGKat Twisted Pair Transmitter

About Kramer Electronics WP-577VH The WP-577VH is wall plate transmitter for HDMI and computer graphics video with unbalanced stereo audio and RS-232 signals. The unit encodes the input signals into DGKat twisted pair that it transmits to a compatible DGKat switcher or receiver. • Max. Data Rate: 4.95Gbps (1.65Gbps per graphic channel) • HDTV Compatible • HDCP Compliant • HDMI Support: x.v. Color and 3D • Digital Audio Format Support • HPD (Hot Plug Detect) Signals: Automatic live input detection based on 5V presence • K-Link Compatibility: Uses RS-232 to control other Kramer devices and send data to remote, external RS-232 devices. • Automatic Switching: To the last connected or priority video input • Automatic Analog Audio Detection and Embedding • EDID PassThru: Passes EDID/HDCP signals from source to display • Data Equalization and Reclocking • Protocol 3000 Support • Decora US Wall Plate PowerConnectPlus A single connection to the transmitter or the receiver powers both units. The higher voltage PowerConnectPlus also powers regular PowerConnect devices via auto-negotiation. Compatible power connect source: VS-62D. DGKat Signal Integration Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. They strongly recommend using Kramer DGKat cables designed specifically for optimum performance. System Range Up to 90m (295′) at 1080i or up to 30m (98′) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295) at 1080i or up to 70m (230) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330′) at 1080i or up to 90m (295) at 1080p on shielded BC-DGKat7a23 cable. Cable Requires Shielded Twisted Pair (STP) Cable – For optimum range and performance use, use Kramer’s BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.