Wooden Camera Blackmagic Pocket Cinema Camera 4K/6K Unified Pro Accessory Kit

About Wooden Camera Unified Accessory Kit — Blackmagic Pocket Cinema Camera 4K Unified Accessory Kit (Pro) — The Blackmagic Pocket Cinema Camera 4K Unified Accessory Kit (Pro) is a camera support package designed for the Blackmagic Pocket Cinema Camera 4K. The BMPCC4K accessory package features our Unified BMPCC4K Camera Cage, a form fitting camera cage for secure camera accessory attachment, Unified DSLR 15mm Baseplate, a quick release baseplate that holds two 15mm Rod (15″) at the correct lens height, Safety Dovetail (12″) which interfaces with the ARRI dovetail slot on the bottom of the Unified Baseplate, A-Box (DSLR) for XLR audio inputs, Ultra Arm Monitor Mount (1/4-20 To 1/4-20, 3″), an articulating arm with multiple mounting points for accessories and our Rod Clamp (15mm LW) which attaches the Battery Slide to the 15mm LW rods. The Battery Slide is an adjustable battery plate for attaching a V-Mount or Gold Mount plate to the camera. — Unified BMPCC4K Camera Cage — The Unified BMPCC4K Camera Cage is designed for the Blackmagic Pocket Cinema 4K camera and features a minimalist design that provides mounting points on the top and side while leaving all of the camera’s vital controls on the right grip and left side easily viewable and accessible. The cage includes a reversible top handle in your choose of wood or rubber, which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip! The bottom portion of the cage includes a Manfrotto quick release dovetail which can attach to a variety of Manfrotto tripod heads. Quick release functionality works the same as existing Manfrotto plates. Simply turn the thumbscrew and depress the release pin to slide the plate backward out of the base. A built lens adapter support system is integrated into the base which is great for attaching to adapters with a 1/4″-20 on the bottom like our MFT To PL Mount Pro (1/4-20 Support Foot) and also many Metabones products. If lightweight 15mm support is desired, the cage may be combined with our Unified DSLR 15mm Baseplate to provide pass through rod support (sold separately). — Unified DSLR 15mm Baseplate — Unified DSLR 15mm Baseplate is a height adjustable baseplate attachment that provides 15mm lightweight rods at the correct lens height for DSLR cameras when combined with Unified DSLR Cage (Small) or Unified DSLR Cage (Medium). The Unified DSLR 15mm Baseplate has a native ARRI dovetail interface for direct mounting to our 2060 Dovetails, Safety Dovetails or Shoulder Rigs. The included Lower Quick Dovetail portion can be attached to any tripod plate or ARRI standard bridge plate such as Unified Bridge plate (19mm) or Unified Bridge plate (15mm Studio) providing studio rods at the correct lens height. — 15mm Rod 15mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors and more. — Ultra Arm Monitor Mount — Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3″) is an articulating arm with two sets of 25mm (1 inch) double ball joints which allow a monitor or accessory to be positioned in just about any orientation. Tool-less 1/4-20 knobs on each end with non-slip rubber pads make setup quick and easy. Black center thumbscrews ratchet to allow for easy positioning. The 3″ title refers to the center extension length but actual length fully extended measures 240mm (9.4 inches). Ultra Arm components are interchangeable so you can use this arm in conjunction with the other options we make like 3/8-16, NATO Clamp, Hot Shoe and Super Clamp. You can also change the center extension piece! Many existing 3rd party 25mm ball systems are compatible as well. Great for attaching LCDs, lights, audio recorders and much more! — 12″ Safety Dovetail — 12″ ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. Attach to Shoulder Pad for custom handheld configurations. Perfect for Manfrotto, Miller, Cartoni and more. — A-Box (DSLR) — Made for DSLRs and any camera with single 3.5mm input (also referred to as 1/8″). A-Box (DSLR) adapts two industry standard XLR male plugs to one right angle 3.5mm stereo plug. Works best with cameras that allow for Auto Gain Control to be disabled. Highest quality professional grade connectors. Comes with free Bolt On 19mm Rod for attaching to any 1/4-20 threaded hole and 15mm Adapter Bushing for clamping to 15mm rods. This adapter does not provide phantom power. Also great for Canon C100, Handycam style cameras, Blackmagic Pocket and more! — Rod Clamp (15mm LW) — Rod Clamp (15mm LW) can attach to existing 15mm rods to provide 1/4-20 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates and more. Extremely versatile, compact and lightweight. — Battery Slide — Battery Slide is an adjustable mounting system for WC V-Mount, WC Gold Mount, QRC Gold Mount and RED/Blueshape style battery plates. Rows of pass through holes allow attachment of Rod Clamps, cheeseplates and more. Apply firm pressure to tilt the plate in place. Loosen the thumbscrew to slide the plate up and down and also tilt. Great for adjusting counterbalance and for transitioning from studio to handheld mode. Wooden Camera Unified Accessory Kit Features Unified BMPCC4K Camera Cage: 1/4″-20 holes – in standard spacing (9mm center to center) 3/8″-16 holes – includes ARRI style locating pins and Manfrotto locating slots Folding and reversible top handle Manfrotto dovetail receiver plate Rod Length: 117mm COMPATIBILITY Designed for use with: Blackmagic Design